74LCX574TTR [STMicroelectronics]

74LCX574TTR Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~3.6V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74LCX series. This D flip flop should not have a frequency greater than 150MHz. A total of 1elements are present in it. A total of 20terminations have been recorded. The 74LCX574 family contains it. A voltage of 2.7V provides power to the D latch. This T flip flop has a capacitance of 6pF farads at the input. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 8bits. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. This flip flop has a total of 2ports. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 3output lines. Quiescent current is consumed by the D latch in the amount of 10?A.

74LCX574TTR Features

Tape & Reel (TR) package
74LCX series
20 pins
8 Bits

74LCX574TTR Applications

There are a lot of STMicroelectronics
74LCX574TTR Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory