74V1T79STR Overview

SC-74A, SOT-753is the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74V series. This D flip flop should not have a frequency greater than 180MHz. There is 1?A quiescent consumption. A total of 5terminations have been recorded. The 74V1T79 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 4pF farads at the input. It belongs to the family of electronic devices known as 74V. There is an electronic part that is mounted in the way of Surface Mount. The 5pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 1bits. The superior flexibility of this circuit is achieved by using 1 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it.

74V1T79STR Features

Tape & Reel (TR) package
74V series
5 pins
1 Bits
5V power supplies

74V1T79STR Applications

There are a lot of STMicroelectronics
74V1T79STR Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory