HCF4046BEY [STMicroelectronics]

HCF4046BEY Overview

The Tube method is used for packaging clock ICs. As part of the 16-DIP (0.300, 7.62mm) package, this clock generator is embedded. This clock generator ic can sustain 245 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 5V voltage should be applied. In this clock generator, CMOS is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 1.4MHz frequency is provided by this clock-based RF synthesizer. The Through Hole allows the electrical component to be installed conveniently on the panel. 20V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~20V. Test statistics estimate a temperature of -55°C~125°C, which should be set as the ambient temperature. It has been classified as a Phase Lock Loop (PLL) electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number HCF4046. There are 16 pins on the frequency generators that are available for use. Supply voltage 5V is what clock generator can handle. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device.

HCF4046BEY Features

Available in the 16-DIP (0.300, 7.62mm)
Supply voltage of 5V
Operating supply voltage of 5V

HCF4046BEY Applications

There are a lot of STMicroelectronics
HCF4046BEY Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems