L9347LF-TR [STMicroelectronics]

L9347LF-TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the L9347 family.A total of 36 terminations can be found in it.During operation, the 36 pins are used.It is important to note that the LED driving board has 4 functions.From the lighting driver, there is a maximum output of 2.5A 5AV.To comply with the operation criteria, the maximum output current is reduced to 7.5A.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 36 pins.In this case, there is 350mOhm resistance in the LED driving board.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).This system has a maximum current requirement of 5mA.

L9347LF-TR Features

Supplied from 5V
Resistance of 350mOhm

L9347LF-TR Applications

There are a lot of STMicroelectronics
L9347LF-TR Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD