L9349TR-LF [STMicroelectronics]

L9349TR-LF Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 20-PowerSOIC (0.433, 11.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the L9349 family.A total of 20 terminations can be found in it.During operation, the 20 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 3A 5AV.To comply with the operation criteria, the maximum output current is reduced to 5A.It is possible to obtain high efficiency with a supply voltage of 12V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 20 pins.In this case, there is 300mOhm resistance in the LED driving board.This results in a 3A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 32V (Vsup).This system has a maximum current requirement of 8mA.

L9349TR-LF Features

Supplied from 12V
Resistance of 300mOhm

L9349TR-LF Applications

There are a lot of STMicroelectronics
L9349TR-LF Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD