LED1642GWXTTR [STMicroelectronics]

LED1642GWXTTR Overview

There is also a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package that is used to save space on the board. Using this LED driver, there are 16 outputs.As far as mounting is concerned, Surface Mount is adopted.Linear emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Signage has many advantages.It operates with terminations of 24.This LED driver is configured with a base of 24 pins.It is estimated that there are 16 segments.It's mounted by Surface Mount.Under the base part number LED1642, you will find this LED driver.Ideally, the supply voltage should be 5.5V.It operates at a voltage of 3V as its minimal input voltage.Supply current cannot exceed 5.5V.With a minimum supply current less than 10mA, this device achieves high efficiency.There is no current available to supply to the load.Powering systems requires an internal voltage of 3.3V.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.LED drivers can deliver all benefits of 400mA due to their maximum output current.19V should be the maximum output voltage.

LED1642GWXTTR Features

Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Operating with the supply voltage of 3.3V
Switching frequency of 30MHz

LED1642GWXTTR Applications

There are a lot of STMicroelectronics
LED1642GWXTTR LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices