LED5000PHR [STMicroelectronics]

LED5000PHR Overview

In order to save board space, the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.It emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The benefits of Lighting, Signage are considerable.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 8 pins.A total of 6 segments have been created.It's mounted in Surface Mount.Part number LED5000 represents this LED driver.It is acceptable to supply voltages of 48V.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 5.5V volts, it can operate.For highest efficiency, it works with a minimal supply voltage of 5.5V.In terms of supply current, 48V is the maximum value.Loads can only be powered by 3A current.As long as the switching frequency is maintained at 850kHz, this electronic component is able to perform all of its functions properly.When operating with a maximum output current of 3A, it can deliver all the benefits of a LED driver.

LED5000PHR Features

Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 850kHz

LED5000PHR Applications

There are a lot of STMicroelectronics
LED5000PHR LED Driver ICs applications.

• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps