LM2901HYDT [STMicroelectronics]

LM2901HYDT Overview

For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching LM2901 .As a result, this comparator displays a quiescent current of 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2mA when using the device.There is sufficient power to run the device from 5V power supplies.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Comparator electronics is not recommended to operate the system at a temperature above 150°C .Comparator electronics cannot be used at a temperature below -40°C .A comparator part from the Automotive, AEC-Q100 series is used in this part.The device is packed in TAPE AND REEL and is intended for general use (as an element in the ADC circuit).

LM2901HYDT Features

CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM2901HYDT Applications

There are a lot of STMicroelectronics
LM2901HYDT linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets