Part No:
M25P10-AVMN6T
Category:
Interface ICs
Description:
3/3.3V V Surface Mount 8 Pin Memory IC M25P10 5mm mm
Package:
-
Production Status:
In Stock Status:
Specification
Package / Case
8-SOIC (0.154, 3.90mm Width)
Moisture Sensitivity Level (MSL)
Additional Feature
40 MHZ CLOCK FREQUENCY AVAILABLE UPON REQUEST
Peak Reflow Temperature (Cel)
Time@Peak Reflow Temperature-Max (s)
Supply Voltage-Max (Vsup)
Supply Voltage-Min (Vsup)
Write Cycle Time - Word, Page
Endurance
100000 Write/Erase Cycles
Products Detail
M25P10-AVMN6T Overview
A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. Embedded in the 8-SOIC (0.154, 3.90mm Width) case, memory ics is a single file. On the chip, there is an 1Mb 128K x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.3V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3V will be necessary. A clock frequency rotation within 50MHz is used for the ic memory chip to rotate data. Similar parts are frequently selected using the ic memory chip's base part number, M25P10. A 8-pin package containing this memory device is used to house this device. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. This chip features all the merits of a conventional chip, but it also features 40 MHZ CLOCK FREQUENCY AVAILABLE UPON REQUEST to improve system performance. As for power supplies, this memory chip requires just 3/3.3V . Its SPI-type serial bus helps transfer data to the CPU efficiently. In order to operate your device, you will need to provide a maximum supply current of 0.015mA. A programming voltage of 2.7V is required to change a nonvolatile memory array's state. Usually, this memory ics falls under the EEPROMs component category.
M25P10-AVMN6T Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Additional Feature:40 MHZ CLOCK FREQUENCY AVAILABLE UPON REQUEST
M25P10-AVMN6T Applications
There are a lot of STMicroelectronics
M25P10-AVMN6T Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
Key Features
No key features available
Application scenarios
No application scenarios available
Documents