M41ST87WSS6F Overview

There is a version of real time clocks in the package 20-SSOP (0.209, 5.30mm Width).The package is in the form of Tape & Reel (TR).A voltage of 2.7V~3.6V is supplied to this electrical RTC.This electrical real time clock is type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.-40°C~85°C is the operating temperature.There is a way to make sure that Alarm, Leap Year, NVSRAM, Square Wave Output, Supervisor, Watchdog Timer is maintained when operating if desired.When a transmission line is terminated with 28 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.In this RTC real time clock, there is a voltage of 3V supplied to it.As it has 28 pins, it is equipped with the necessary features.As far as the family are concerned, RTCs are part of M41ST.This electrical digital time clock's supply voltage is 2.5V~3.6V.It falls under the subcategory of Timers or RTCs.There should not be a frequency higher than 0.032MHz in the output.The mounting type of the RTC module is Surface Mount.There is a power supply of 3/3.3V used to power the real time clock.A total of 20 pins are attached to this real time clock.1 timer real time clocks send out a signal at a preset time based on input signals.A 8 bit digital time clock is designed for this application.

M41ST87WSS6F Features

20-SSOP (0.209, 5.30mm Width) package
28 terminations
28 pin count
3/3.3V power supplies
8 Bits

M41ST87WSS6F Applications

There are a lot of STMicroelectronics M41ST87WSS6F Real Time Clocks applications.

• Copy machines

• Digital video camera

• Electronic metering

• Utility Meters

• GPS/Telematics Devices

• Mobile telephones

• Embedded Systems

• IoT

• Battery powered products

• Battery powered devices