M74HC4016B1R [STMicroelectronics]

M74HC4016B1R Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-DIP (0.279, 7.10mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there are 14 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 14 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with M74HC401 if you are looking for analog multiplexer variants. It has an internal resistance of 120Ohm. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 8μA. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 8μA. There are SEPARATE OUTPUT outputs on this analog switch ic. There are 4 inputs to be operated.

M74HC4016B1R Features

1 Channels
Switch Circuit: SPST - NO
8μA Supply Current
-3db Bandwidth: 42MHz

M74HC4016B1R Applications

There are a lot of STMicroelectronics
M74HC4016B1R Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems