M74HCT174RM13TR [STMicroelectronics]

M74HCT174RM13TR Overview

The package is in the form of 16-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HCT series. In order for it to function properly, its output frequency should not exceed 56MHz. The element count is 1 . It consumes 4?A of quiescent 16terminations have occurred. The M74HCT174 family contains this object. It is powered by a voltage of 5V . A 5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of HCT. It is mounted in the way of Surface Mount. There are 16pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 6bits has been designed. In order to achieve its superior flexibility, 7 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 5Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.

M74HCT174RM13TR Features

Tape & Reel (TR) package
74HCT series
16 pins
6 Bits
5V power supplies

M74HCT174RM13TR Applications

There are a lot of STMicroelectronics
M74HCT174RM13TR Flip Flops applications.

• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division