M74HCT574B1R [STMicroelectronics]

M74HCT574B1R Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HCT series. A frequency of 50MHzshould be the maximum output frequency. A total of 1elements are contained within it. As a result, it consumes 4?A quiescent current and is not affected by external forces. The number of terminations is 20. It is a member of the M74HCT574 family. An input voltage of 5Vpowers the D latch. There is 5pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Through Hole. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. Using 8 circuits, it is highly flexible. In order for the device to operate, it requires 5V power supplies. The flip flop has 2embedded ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The JK flip flop is with 3 output lines to operate.

M74HCT574B1R Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

M74HCT574B1R Applications

There are a lot of STMicroelectronics
M74HCT574B1R Flip Flops applications.

• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory