ST10F273Z4Q3 [STMicroelectronics]

ST10F273Z4Q3 Description

The ST10F273Z4Q3 device is a 16-bit single-chip CMOS microcontroller from the ST10 series of STMicroelectronics.

The ST10F273Z4Q3 combines a powerful CPU with high peripheral functionality and improved I/O capabilities. It can process up to 32 million instructions per second. Additionally, it offers high-speed RAM, single-voltage Flash memory, and PLL-generated clocks on the same chip.

Processing for ST10F273Z4Q3 uses 0.18mm CMOS technology. A 5 V to 1.8 V on-chip voltage regulator powers the MCU core and the logic. I/Os on the part operate at 5 V and are provided by a single 5 V supply.

ST10F273Z4Q3 Features

• A/D Converter

– 24-channel 10-bit

– 3 μs Minimum conversion time

• Serial channels

– 2 synch. / asynch. serial channels

– 2 high-speed synchronous channels

– I2C standard interface

• 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 messages, C-CAN version)

• Fail-safe protection

– Programmable watchdog timer

– Oscillator watchdog

• On-chip bootstrap loader

• Clock generation

– On-chip PLL and 4 to 12 MHz oscillator

– Direct or prescaled clock input

• Real-time clock and 32 kHz on-chip oscillator

• Up to 111 general purpose I/O lines

– Individually programmable as input, output or special function

– Programmable threshold (hysteresis)

• Idle, power down and stand-by modes

• Single voltage supply: 5 V ±10%

• High performance 16-bit CPU with DSP functions

– 31.25 ns instruction cycle time at 64 MHz max CPU clock

– Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator

– Enhanced boolean bit manipulations

– Single-cycle context switching support

• Memory organization

– 512 Kbyte on-chip Flash memory single voltage with erase/program controller (full performance, 32-bit fetch)

– 100K erasing/programming cycles.

– Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)

– 2 Kbyte on-chip internal RAM (IRAM)

– 34 Kbyte on-chip extension RAM (XRAM)

– Programmable external bus configuration & characteristics for different address ranges

– 5 programmable chip-select signals

– Hold-acknowledge bus arbitration support

• Interrupt

– 8-channel peripheral event controller for single cycle interrupt driven data transfer

– 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6 ns

• Timers

– 2 multifunctional general-purpose timer units with 5 timers

• Two 16-channel capture/compare units

• 4-channel PWM unit + 4-channel XPWM

ST10F273Z4Q3 Applications

• Light sensing & controlling devices

• Temperature sensing and controlling devices

• Fire detection & safety devices

• Industrial instrumentation devices

• Process control devices