STAP16DPPS05XTTR [STMicroelectronics]

STAP16DPPS05XTTR Overview

There is also a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package that is used to save space on the board. Using this LED driver, there are 16 outputs.As far as mounting is concerned, Surface Mount is adopted.Linear emerges with high efficiency and reliability.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Backlight, Lighting has many advantages.This LED driver is configured with a base of 24 pins.It's mounted by Surface Mount.Under the base part number STAP16, you will find this LED driver.Ideally, the supply voltage should be 5.5V.It produces a voltage of 20V volts.It operates at a voltage of 3V as its minimal input voltage.Supply current cannot exceed 5.5V.With a minimum supply current less than 11mA, this device achieves high efficiency.There is no current available to supply to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.LED drivers can deliver all benefits of 40mA due to their maximum output current.20V should be the maximum output voltage.

STAP16DPPS05XTTR Features

Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Switching frequency of 30MHz

STAP16DPPS05XTTR Applications

There are a lot of STMicroelectronics
STAP16DPPS05XTTR LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices