STCF05TBR [STMicroelectronics]

STCF05TBR Overview

In order to save board space, the 25-TFBGA package is used. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.It emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Camera Flash are considerable.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 25 pins.A total of 2 segments have been created.It's mounted in Surface Mount.Part number STCF05 represents this LED driver.It is acceptable to supply voltages of 5.5V.In addition, it has 25 pins.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 2.5V volts, it can operate.In terms of supply current, 5.5V is the maximum value.As long as the switching frequency is maintained at 1.8MHz, this electronic component is able to perform all of its functions properly.When operating with a maximum output current of 400mA, it can deliver all the benefits of a LED driver.It is important to keep the output voltage below 10.2V.It maintains a -300mV minimum voltage output.This device is equipped with an output type of Frequency.

STCF05TBR Features

Available in the 25-TFBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.8MHz

STCF05TBR Applications

There are a lot of STMicroelectronics
STCF05TBR LED Driver ICs applications.

• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps