Name: STG3699AQTR
Brand: STMicroelectronics
SKU: STG3699AQTR

Type

Parameter

Contact Plating

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-VFQFN Exposed Pad

Number of Pins

Operating Temperature

-55°C~125°C TA

Packaging

Tape & Reel (TR)

JESD-609 Code

Part Status

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

Resistance

45mOhm

Additional Feature

2-CHANNEL MUX/DEMUX

Max Power Dissipation

1.12W

Technology

CMOS

Terminal Position

QUAD

Terminal Form

NO LEAD

Peak Reflow Temperature (Cel)

260

Number of Functions

Supply Voltage

2.7V

Terminal Pitch

0.5mm

Time@Peak Reflow Temperature-Max (s)

Base Part Number

STG3699

Pin Count

Number of Outputs

Qualification Status

Not Qualified

Operating Supply Voltage

Polarity

Non-Inverting

Number of Channels

Max Supply Voltage

4.3V

Min Supply Voltage

1.65V

Operating Supply Current

50nA

Power Dissipation

1.12W

Max Supply Current

50nA

Turn On Delay Time

120 ns

Supply Type

Single

Turn-Off Delay Time

30 ns

-3db Bandwidth

50MHz

On-State Resistance (Max)

450mOhm

High Level Output Current

300mA

Low Level Output Current

300mA

Multiplexer/Demultiplexer Circuit

2:1

Off-state Isolation-Nom

64 dB

Current - Leakage (IS(off)) (Max)

20nA

Channel Capacitance (CS(off), CD(off))

5pF

On-state Resistance Match-Nom

0.06Ohm

Switch Circuit

SPDT

Switch Time (Ton, Toff) (Max)

55ns, 30ns

Charge Injection

35pC

Crosstalk

-54dB @ 100kHz

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

55ns

Voltage - Supply, Single (V+)

1.65V~4.3V

Length

3mm

Height Seated (Max)

1mm

RoHS Status

RoHS Compliant

STG3699AQTR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-VFQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Search with STG3699 if you are looking for analog multiplexer variants. It has an internal resistance of 45mOhm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 50nA. A voltage of 1.65V~4.3V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 50nA. There is a voltage range of 3V operating voltages for the electrical part. There is also 2-CHANNEL MUX/DEMUX to look out for in this electronic part. The analog switch ics has 8 outputs.