STL65N3LLH5 [STMicroelectronics]

STL65N3LLH5 Overview

An op amp's input capacitance is defined as the capacitance between both of its input terminals with either input grounded, and 1500pF @ 25V is its maximum input capacitance.The drain current is the maximum continuous current the device can conduct, and this device has 9.5A continuous drain current (ID).A drainage-to-source breakdown voltage corresponds to the voltage at which a specified value of ID flows, where VGS is 30V, and this device has a drainage-to-source breakdown voltage of 30VV.Drain current refers to the maximum continuous current a device can conduct, and it is 65A.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 22.7 ns.Peak drain current is 76A, which is the maximum pulsed drain current.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 9.3 ns.An FET transistor's gate-source voltage, VGS, indicates how much voltage is applied across the transistor's gate-source terminal and it can range from 22V to 1.In this case, the threshold voltage of the transistor is 1V, which means that it will not activate any of its functions when its threshold voltage reaches 1V.Using drive voltage (4.5V 10V), this device contributes to a reduction in overall power consumption.

STL65N3LLH5 Features

a continuous drain current (ID) of 9.5A
a drain-to-source breakdown voltage of 30V voltage
the turn-off delay time is 22.7 ns
based on its rated peak drain current 76A.
a threshold voltage of 1V

STL65N3LLH5 Applications

There are a lot of STMicroelectronics
STL65N3LLH5 applications of single MOSFETs transistors.

• AC-DC Power Supply
• Synchronous Rectification for ATX 1 Server I Telecom PSU
• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies