STLD20D-C8 [STMicroelectronics]

STLD20D-C8 Overview

Using its SOT-23-8 package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.Backlight has considerable advantages.A frequency of 500kHz is used to operate it.The operation of this system is supported by 8 terminations.This configuration is built upon 8 pins.It is possible that failures will occur if the voltage supply is below 2.8V.4 segments are present.The mount is in the way of Surface Mount.The LED driver is available under the part number STLD20.There is no maximum value acceptable for the supply voltage, so 5V is acceptable.The device has a pin count of 8.The voltage range of this device is optimized for a maximum supply voltage of 4.2V.In addition to Display Drivers, it is also classified by its characteristics.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.It is necessary to power systems with a voltage of 3.3V

STLD20D-C8 Features

Available in the SOT-23-8 package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz
Operating with the supply voltage of 3.3V

STLD20D-C8 Applications

There are a lot of STMicroelectronics
STLD20D-C8 LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights