STM704RM6E [STMicroelectronics]

STM704RM6E Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3.6V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by STM704. It requires 3/5V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 60μA.

STM704RM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM704RM6E Applications

There are a lot of STMicroelectronics
STM704RM6E Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics