STM805TM6F [STMicroelectronics]

STM805TM6F Overview

As you can see, this power management is mounted through 8 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using STM805, the base power ics number. A power supply of 3.3/5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.

STM805TM6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM805TM6F Applications

There are a lot of STMicroelectronics
STM805TM6F Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system