STP08CL596B1 [STMicroelectronics]

STP08CL596B1 Overview

As a result of its 16-DIP (0.300, 7.62mm) package, it helps to save board space on the board. It has 8 outputs for LED drivers.We are using Through Hole as the mounting method.With high efficiency, it emerges as a Linear.It is possible for the led driver ic to function normally at -40°C~125°C TA.Using the frequency of 25MHz, it operates.In order for it to operate, it has 16 terminations.The base is configured with 16 pins.If the voltage supply is lower than 3V, undetermined failures may occur.There are 7 segments in it.This is mounted by Through Hole.You can find this LED driver under the base part number STP08C.3.6V is an acceptable maximum value for the supply voltage.The output voltage of the device is 16V.There are 16 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.When the supply current should be less than 14.1mA, the device will provide high efficiency.

STP08CL596B1 Features

Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V

STP08CL596B1 Applications

There are a lot of STMicroelectronics
STP08CL596B1 LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage