STP16CPPS05PTR [STMicroelectronics]

STP16CPPS05PTR Overview

Using its 24-SSOP (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers design with 16 outputs.This mounting method is Surface Mount.The system emerges as a Linear with high efficiency.It is capable of working normally at -40°C~125°C TA.A frequency of 30MHz is used to operate it.The operation of this system is supported by 24 terminations.This configuration is built upon 24 pins.It is possible that failures will occur if the voltage supply is below 3V.16 segments are present.The mount is in the way of Surface Mount.The LED driver is available under the part number STP16C.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.Its output voltage is 20V.The device has a pin count of 24.In addition to Display Drivers, it is also classified by its characteristics.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.It is possible to provide high efficiency when the maximal supply current is less than 9.5mA.40mA is the maximum amount of current that can be supplied to the load.

STP16CPPS05PTR Features

Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V

STP16CPPS05PTR Applications

There are a lot of STMicroelectronics
STP16CPPS05PTR LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights