VN02NSP [STMicroelectronics]

VN02NSP Overview

As you can see, it's packaged in the way of a Tube.This file is included in package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the VN02 family.As a result, there are 10 terminations.In order to operate, 10 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 10 pins.It has 400mOhm resistance.When this is the case, the output current is set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Optimal efficiency requires a voltage of 26V.The maximum input voltage is 26V volts.A minimum input voltage of 7V volts is required for this LED driver.A maximum current requirement of 50mA is required for its operation.

VN02NSP Features

Supplied from 13V
Resistance of 400mOhm

VN02NSP Applications

There are a lot of STMicroelectronics
VN02NSP Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards