VN820SP13TR [STMicroelectronics]

VN820SP13TR Overview

It is packaged in the form of a Cut Tape (CT).It is included with the PowerSO-10 Exposed Bottom Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart, Status Flag features available on the LED driving board.As you can see, it comes from the VN820 family.A total of 10 terminations can be found in it.During operation, the 10 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 9A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.It has a power supply of 8/36V.This system has a maximum current requirement of 3.5mA.Drivers for this part number 1 are available.

VN820SP13TR Features

Supplied from 13V

VN820SP13TR Applications

There are a lot of STMicroelectronics
VN820SP13TR Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD