VNB10N07-E [STMicroelectronics]

VNB10N07-E Overview

The package is in the form of a Tube.It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNB10 family of LED drivers.It contains 2 terminations.It is necessary to use the 3 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 10A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.A total of 3/2 pins are present on it.Lighting drivers with 100mOhm resistance are used.A component of this type is included in the OMNIFET?, VIPower? series.This case results in a 7A output current.When using this LED driving board, it is recommended that the supply voltage is set to 18V.There is a maximum current requirement of 250?A for its operation.

VNB10N07-E Features

Resistance of 100mOhm

VNB10N07-E Applications

There are a lot of STMicroelectronics
VNB10N07-E Power Switches ICs applications.

• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD