VND5004ATR-E [STMicroelectronics]

VND5004ATR-E Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 24-PowerDFN package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.As you can see, it comes from the VND5004 family.A total of 16 terminations can be found in it.During operation, the 24 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 100A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 16 pins.In this case, there is 4mOhm resistance in the LED driving board.It is included in the VIPower? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 13V.This system has a maximum current requirement of 6mA.

VND5004ATR-E Features

Supplied from 13V
Resistance of 4mOhm

VND5004ATR-E Applications

There are a lot of STMicroelectronics
VND5004ATR-E Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD