VND60013TR [STMicroelectronics]

VND60013TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 16-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.As you can see, it comes from the VND600 family.A total of 16 terminations can be found in it.During operation, the 16 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 25AV.To comply with the operation criteria, the maximum output current is reduced to 40A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 16 pins.In this case, there is 35mOhm resistance in the LED driving board.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.It has a power supply of 8/36V.

VND60013TR Features

Supplied from 13V
Resistance of 35mOhm

VND60013TR Applications

There are a lot of STMicroelectronics
VND60013TR Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD