VND600SP [STMicroelectronics]

VND600SP Overview

It is packaged in the manner of a Tube.There is a PowerSO-10 Exposed Bottom Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND600 family consists of this type.It consists of 10 terminations in total.In order to operate, the 10 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 40A.The supply voltage of 13V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 10 pins are included in this LED driver.In this LED driving board, there is 30mOhm resistance.In this case, the output current will be set to 25A.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.

VND600SP Features

Supplied from 13V
Resistance of 30mOhm

VND600SP Applications

There are a lot of STMicroelectronics
VND600SP Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards