VND830TR-E [STMicroelectronics]

VND830TR-E Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 16-SOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.It comes under the family of VND830.A total of 16 terminations have been recorded.The operation is performed through the 16 pins.Currently, the lighting driver has a total of 2 functions.This operation requires the maximum output current to be decreased to 6A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way.16 pins are connected to it in total.Currently, the LED driving board has 60mOhm resistance.It is part of the VIPower? series.As a result, the output current is set to 9A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It is recommended to set the supply voltage to 36V for optimum efficiency.Input voltage is limited to 36V volts.A voltage of 5.5V volts is the minimum input voltage.It has a maximum current requirement of 12?A.

VND830TR-E Features

Supplied from 13V
Resistance of 60mOhm

VND830TR-E Applications

There are a lot of STMicroelectronics
VND830TR-E Power Switches ICs applications.

• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap