VND920-E [STMicroelectronics]

VND920-E Overview

It is packaged in the manner of a Tube.There is a 28-SOIC (0.295, 7.50mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Auto Restart features.The VND920 family consists of this type.In order to operate, the 28 pins are used.In order to meet the operation criteria, the maximum output current drops to 30A.As a result, it is mounted in the manner of Surface Mount.A total of 28 pins are included in this LED driver.In this LED driving board, there is 16mOhm resistance.There is an electrical component included in the VIPower? series.In this case, the output current will be set to 30A.It is recommended that the supply voltage be set at 36V in order to achieve maximum efficiency.It has a maximum input voltage of 36V volts.As a minimum input voltage, it requires 5.5V volts.For its operation, a maximum current requirement of 5mA is required.

VND920-E Features

Resistance of 16mOhm

VND920-E Applications

There are a lot of STMicroelectronics
VND920-E Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards