VNP14NV04-E [STMicroelectronics]

VNP14NV04-E Overview

The package is in the form of a Tube.It is included in the package TO-220-3.The lighting driver is mounted in the Through Hole position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNP14N family of LED drivers.It is necessary to use the 3 pins in order to operate the LED driver.12AV is the maximum output of the LED driver.This results in the maximum output current dropping to 18A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount, Through Hole.Lighting drivers with 35mOhm resistance are used.A component of this type is included in the OMNIFET II?, VIPower? series.This case results in a 12A output current.You can select from 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 6.8V.Stable operation is possible with a maximum operating temperature of 150°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 8VV as its maximum supply voltage.It is possible to use a voltage as low as 6V V as a power supply voltage.A total of 1 drivers are included in the part.

VNP14NV04-E Features

Resistance of 35mOhm
1 channels

VNP14NV04-E Applications

There are a lot of STMicroelectronics
VNP14NV04-E Power Switches ICs applications.

• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD