VNQ830PEP-E [STMicroelectronics]

VNQ830PEP-E Overview

As a result, it is packaged in the form of a Tube.This package is included in 24-PowerBSOP (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 4 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart, Status Flag features.It comes under the family of VNQ830.A total of 24 terminations have been recorded.The operation is performed through the 24 pins.Currently, the lighting driver has a total of 4 functions.There is a maximum output of 14AV from the LED driver.This operation requires the maximum output current to be decreased to 18A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way.24 pins are connected to it in total.Currently, the LED driving board has 65mOhm resistance.It is part of the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).This part has a power supply of 8/36V volts.It is recommended to set the supply voltage to 13V for optimum efficiency.It has a maximum current requirement of 13.5mA.

VNQ830PEP-E Features

Supplied from 13V
Resistance of 65mOhm

VNQ830PEP-E Applications

There are a lot of STMicroelectronics
VNQ830PEP-E Power Switches ICs applications.

• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap