BQ25012RHLRG4 Overview

It belongs to package VQFN. This system battery uses an analog integrated circuit (IC) called SWITCHING REGULATOR. Total pins are 20. There is a Tape and Reel case packaging. A voltage of at least 4.5V volts is required on this electric component. Electronic parts in the Power Management Circuits family are found here. In order for this power management IC to function correctly, the supplied voltage can't exceed 6.5V volts. If you want to activate this system battery, it must be at least -40°C. Temperatures less than 125°C degrees Celsius are recommended for use. A 5V volt supply powers it. It is imperative to keep this transceiver ic set to 5V at all times. In total, it has 20 pins. PFM MODE IS ALSO AVAILABLE can be discovered in the smart tools battery when using it. A maximum of 2mA current must be available from the supply (Isup). The voltage output is 4.2V. Input voltages below 4.5V volts are acceptable for the battery protector ic.

BQ25012RHLRG4 Features

Available in VQFN Package
with 20 Pins
operate supply voltage at the range of 5V

BQ25012RHLRG4 Applications

There are a lot of Texas Instruments
BQ25012RHLRG4 Battery Management ICs applications.

• Cell phone towers
• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems
• Tower communications
• Weather stations
• Distributed energy resources
• Solar and wind-generating plants
• Electric street sweepers
• Shuttle robots