BUF602IDBVRG4 [Texas Instruments]

BUF602IDBVRG4 Overview

It is packaged in an SOT-23-5-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 16mV for input offset voltage. A supply current of 5.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 30dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -45°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. It is important to keep in mind that the power supply voltage of this electric component is below 12.6V, which is suitable. Keeping the linear amplifier's supply voltage above 2.8V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts. The VIDEO AMPLIFIER value can be used to sort the electronic part by its consumer IC type.

BUF602IDBVRG4 Features

5 Pins
30dB voltage gain

BUF602IDBVRG4 Applications

There are a lot of Texas Instruments
BUF602IDBVRG4 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering