CD4045BPW Overview

The device is packaged in the 16-TSSOP (0.173, 4.40mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tube. As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 21bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number CD4045. As low as 3V Vsup is the minimum supply voltage. There are 2 input lines that allow binary data to be input in the form of an on/off signal.

CD4045BPW Features

Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
21 bits per element

CD4045BPW Applications

There are a lot of Texas Instruments
CD4045BPW Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications