CD4522BPWRG4 [Texas Instruments]

CD4522BPWRG4 Overview

The device is packaged in the 16-TSSOP (0.173, 4.40mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type Divide-by-N is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. It is important to note that DUMMY VALare really important features of this electronic device. Further related parts may be found under the base part number CD4522. For its packaging, TAPE AND REELis employed. To operate, the device requires a voltage of [0]. As low as 3V Vsup is the minimum supply voltage. Countersis the family name of the electronic part.

CD4522BPWRG4 Features

Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
DUMMY VAL
Operating supply voltage of 18V

CD4522BPWRG4 Applications

There are a lot of Texas Instruments
CD4522BPWRG4 Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications