LM2747MTC [Texas Instruments]

LM2747MTC Overview

As a result of 14-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3V~6V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 50kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 14. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. A search for "LM2747" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 13.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 86 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. A circuit should contain 17V in order to ensure the voltage regulator dc to dc runs safely and reliably. As long as the dc switching is in a dormant state, it utilizes 1.7mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 6V, it must be limited by the user. Voltage 3V is necessary for the supply. At its lowest voltage, the voltage controller does not produce less than 600mV. With this controller, the phase is 1.

LM2747MTC Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %

LM2747MTC Applications

There are a lot of Texas Instruments
LM2747MTC DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery