Name: TL5001CPSR
Brand: Texas Instruments
SKU: TL5001CPSR

TL5001CPSR Overview

It comes in a 8-SOIC (0.209, 5.30mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 3.6V~40V voltage are supplied and operated. A -20°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 20kHz~500kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 6V volts. TL5001 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. As determined by the test statistics, the output voltage of DC regulator is 50V. You should note down the dc dc regulator's usual output current of 20mA when you start a project. Switching controller operates at a frequency of 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. DC switchings that are dormant use 1.1mA. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. There must be a 3.6V supply voltage. DC switcher will not be able to provide an output current above 3A volts. Its datasheet indicates the switching converter can output a maximum of 50V volts. voltage controllers with a minimum voltage output of 1V cannot operate.