TSM934ESE+T Overview

In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Push-Pull, TTL is being used.We ship the part through Cut Tape (CT) .In general, the chip type can be classified as with Voltage Reference .A total of 4 elements can be found in it.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 16 pins.There is 6.5?A current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .A comparator's maximum supply voltage is 11V volts.Using a voltage as low as 2.5V is possible for this comparator.Comparator electronics is part of the TSM93x comparator series.

TSM934ESE+T Features

CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 6.5?A

TSM934ESE+T Applications

There are a lot of Touchstone Semiconductor
TSM934ESE+T linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications