ALD1502SAL [Unknown]

ALD1502SAL Overview

A 8-SOIC (0.154, 3.90mm Width)-shaped packaging surrounds the digital timer. There is 2.5MHz frequency set on the programmable timer.It is used to pack in Tube case. Surface Mount is the recommended mounting type. The programmable timer can supply a voltage of 2V~12V. The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 50?A. The operating supply voltage is rated at 50?A voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 1.

ALD1502SAL Features

Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply?50?A
Max Operating temperature at 0°C
1 Timers/Counters

ALD1502SAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD1502SAL Programmable Timers & Oscillators applications.

• Internet of Things (IoT)
• Intruder Detection
• Tamper Detection
• Home Automation Sensors
• Thermostats
• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems