ALD7556PBL [Unknown]

ALD7556PBL Overview

In the packaging with the 14-DIP (0.300, 7.62mm), there is a programmable timer enclosed in the package. In this case, the programmable timer's frequency is set to 2.5MHz.It is used to pack in Tube case. In this case, the mounting type should be Through Hole.Programmable timers can provide 2V~10V voltages.The type of chips can be divided into 555 Type, Timer/Oscillator (Dual). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 100?A. The operating supply voltage is rated at 100?A voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 10V. The number of Timers/Counters on the device is 2.

ALD7556PBL Features

Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply?100?A
Max Operating temperature at 0°C
2 Timers/Counters

ALD7556PBL Applications

There are a lot of Advanced Linear Devices Inc.
ALD7556PBL Programmable Timers & Oscillators applications.

• Thermostats
• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor