MP3312GC-P [Unknown]

MP3312GC-P Overview

There is also a 9-UFBGA, WLCSP package that is used to save space on the board. Using this LED driver, there are 2 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 1.2MHz.This LED driver is configured with a base of 9 pins.If the voltage supply is below 2.7V, undetermined failures may occur.It's mounted by Surface Mount.Ideally, the supply voltage should be 5.5V.It produces a voltage of 38V volts.An optimized supply voltage of 5.5V is provided.It operates at a voltage of 8V as its minimal input voltage.Supply current cannot exceed 16V.With a minimum supply current less than 2mA, this device achieves high efficiency.Temperatures should not exceed 125°C in order to ensure stable operation.There is no current available to supply to the load.Maintaining a temperature above -40°C is essential for stabilizing operation.The electronic component can fully perform its functions if the switching frequency is maintained at 1.2MHz.LED drivers can deliver all benefits of 30mA due to their maximum output current.40V should be the maximum output voltage.It maintains a minimum voltage of -300mV.It is currently possible to transmit over 2 channels.

MP3312GC-P Features

Available in the 9-UFBGA, WLCSP package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
Switching frequency of 1.2MHz

MP3312GC-P Applications

There are a lot of Monolithic Power Systems Inc.
MP3312GC-P LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices