Name: DG202BDJ-E3
Brand: Vishay
SKU: DG202BDJ-E3

Type

Parameter

Factory Lead Time

12 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Number of Pins

Weight

1.627801g

Operating Temperature

-40°C~85°C TA

Packaging

Tube

Published

2013

JESD-609 Code

Pbfree Code

yes

Part Status

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

Resistance

160Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

470mW

Technology

CMOS

Number of Functions

Supply Voltage

15V

Base Part Number

DG202

Output

SEPARATE OUTPUT

Pin Count

Power Supplies

12/+-15V

Number of Channels

Max Supply Voltage

25V

Min Supply Voltage

4.5V

Operating Supply Current

50μA

Nominal Supply Current

50μA

Power Dissipation

470mW

Max Supply Current

50μA

Throw Configuration

SPST

Turn On Delay Time

300 ns

Number of Inputs

Voltage - Supply, Single/Dual (±)

4.5V~25V ±4.5V~22V

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Turn-Off Delay Time

200 ns

Max Dual Supply Voltage

22V

On-State Resistance (Max)

85Ohm

Min Dual Supply Voltage

4.5V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

90 dB

Current - Leakage (IS(off)) (Max)

500pA

Channel Capacitance (CS(off), CD(off))

5pF 5pF

On-state Resistance Match-Nom

2Ohm

Switch Circuit

SPST - NO

Switch Time (Ton, Toff) (Max)

300ns, 200ns

Charge Injection

1pC

Channel-to-Channel Matching (ΔRon)

2 Ω

Crosstalk

-95dB @ 100kHz

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

85Ohm

Normal Position

Height

3.81mm

Length

21.33mm

Width

7.11mm

REACH SVHC

Unknown

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

DG202BDJ-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with DG202 if you're looking for variants. There is 160Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 25V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 50μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 50μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It is possible to operate 4 inputs. Drain to Source resistance is 85Ohm.