DG300BDJ-E3 [Vishay]

DG300BDJ-E3 Overview

This electronic part is conveniently packaged in 14-DIP (0.300, 7.62mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. An injection of 14 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for DG300 variants of the analog switch ic. Analog switches have 30Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 13V voltage fed to the electrical part below 13V. It would be sufficient to run this analogue multiplexer with 230?A current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. Operating voltages of 15V are compatible with the electrical part. In order to operate the 2 inputs, there are several steps to follow. Resistivity from Drain to Source is 50Ohm for this electronic part.

DG300BDJ-E3 Features

Switch Circuit: SPST - NO
230?A Supply Current
Drain-to-Source resistance: 50Ohm

DG300BDJ-E3 Applications

There are a lot of Vishay Siliconix
DG300BDJ-E3 Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems