Другие модули

Pmod? Pmod? Дисплей OLED 0.9 Оценочная расширительная плата

Evaluation board for prototyping and evaluating TC64X/TC64XB brushless DC fan controllers.

The SY87701L is a complete Clock Recovery and Data Retiming integrated circuit for data rates from 32Mbps up to 1.25Gbps NRZ.

Модуль адаптера 84P.Microsemi FPGA - Адаптер для разъема

Silicon Sculptor 4 is an FPGA programming tool equipped to deliver high data throughput and promote ease of use.

Оценочная плата для PD70201.PD70201 - 1 Изолированный выход специального назначения DC/DC, Оценочная плата для питания по Ethernet

Microsemi's PD70100EVB15B Evaluation Board provides designers with the needed environment to evaluate the performance and implementation of PD applications based on PD70100 PDchip.

The MCP42XX PICtail Plus Daughter Board is a development tool for interfacing with MCP42XX digital potentiometers via the PICtail Plus interface.

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

MCP1630 Low-Cost Li-Ion Battery Charger Reference Design

The MCP1630 NiMH Battery Charger Demo Board is a high-performance, high-frequency switching battery charger that uses the MCP1630 and a microcontroller to charge NiMH batteries.

The KSZ9031RNX is a completely integrated triple-speed (10BASE-T/100BASE-TX/1000BASE-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.

Оценочная плата для KSZ9021GN.KSZ9021GN - Контроллер Ethernet (PHY и MAC) Оценочная плата интерфейса

The KSZ8842-PMQL/PMBL is a 2-port Ethernet switch with a PCI interface, designed for Fast Ethernet applications.

The CENTAUR KS8695PX, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings, enabling original equipment manufacturers (OEMs) to provide customers feature-rich, low-cost solutions for the residential gateway and small office environment.

The KSZ8051MLL is a single-supply 10Base-T/100Base-TX Ethernet physical layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.

The KSZ8041NL is a single supply 10BASE-T/100BASE-TX physical layer transceiver, which provides MII/RMII interfaces to transmit and receive data. The KSZ8041RNL is an enhanced Reduced Media Independent Interface (RMII) version of the KSZ8041NL that does not require a 50-MHz system clock.

The KSZ8051/8031/8021 series is a low-power, small package 10/100 Physical (PHY) Layer Transceiver that provides the MII interface or the RMII interface to transmit and receive data over standard CAT-5 unshielded twisted pair (UTP) cable or fiber.

KS8993 3-Port 10/100 Integrated Switch with PHY and Frame Buffer

Two-Port Ethernet Switch with Non-PCI Interface

3.3V Single Power Supply 10/100 Base-TX/FX MII Physical Layer Transceiver with 2.5V core, supporting MII and RMII interfaces.

The CENTAUR KS8695PX, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings, enabling original equipment manufacturers (OEMs) to provide customers with feature-rich, low-cost solutions for the residential gateway and small office environment.

The CENTAUR KS8695P, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings.

The KSZ8001 is a 10BASE-T/100BASE-TX/100BASE-FX Physical Layer Transceiver, operating the core at 1.8 volts to meet low voltage and low power requirements. The solution provides MII/RMII/SMII interfaces to transmit and receive data.

The GPIO Expander Keypad and LCD Demo Board is a development tool for demonstrating GPIO expander, keypad, and LCD functionality.

The LAN9514 is a high performance, Hi-Speed USB 2.0 hub with a 10/100 Ethernet controller. The EVB9514 is an Evaluation Board that utilizes the LAN9514 to provide a four port USB 2.0 hub with an integrated 10/100 Ethernet controller.

LAN9512 64QFN Customer Evaluation Board for USB 2.0 to Ethernet Hub

The LAN9311/LAN9311i is a full featured, 2 port 10/100 managed Ethernet switch designed for embedded applications.

The LAN9303M/LAN9303Mi is a full featured, 3 port 10/100 managed Ethernet switch designed for embedded applications where performance, flexibility, ease of integration and system cost control are required.

Small Form Factor Three Port 10/100 Managed Ethernet Switch with Single MII/RMII/Turbo MII

LAN9220 / LAN9221 Mini Development Card

High-Performance Single-Chip 10/100 Ethernet Controller for Automotive Applications

Microchip’s LAN8740A, LAN8741A and LAN8742A are the latest generation of low-power, 10/100 Fast Ethernet PHYs featuring Energy Efficient Ethernet (IEEE 802.3az) and Wake-On-LAN functionality, which provides system sleep modes for improved power savings.

The LAN8710/LAN8710i is a low-power 10BASE-T/100BASE-TX physical layer (PHY) transceiver that transmits and receives on unshielded twisted-pair cable.

The Microchip LAN8700/LAN8700i is a low-power, industrial temperature (LAN8700i), variable I/O voltage, analog interface IC with HP Auto-MDIX support for high-performance embedded Ethernet applications.

The SMSC USB82640 Evaluation Board Revision A contains an Ultra Fast USB 2.0 Multi-Format Flash Media Controller and a USB Hub Combo.

The EVB-USB5807/6 is a demonstration and evaluation platform for the USB5807 or USB5806, a 7/6-Port SS/HS USB Smart Hub on a 4-layer RoHS-compliant PCB.

The SMSC USB3803 is a low-power, USB 2.0 hub controller with three downstream ports. It supports low-speed, full-speed, and hi-speed downstream devices.

The USB375x integrates many features that have historically been discrete devices in a mobile product. This device provides significant VBUS protection for the entire system, robust USB interface ESD protection, a USB 2.0 compliant High Speed switch, and USB-IF Battery Charger Detection (revision 1.2) capabilities that are essential to the latest mobile products.

The USB3740B is a USB 2.0 compliant High Speed switch that provides robust ESD protection to the interface in an extremely small package.

USB3503 is a USB 2.0 HSIC High-Speed Hub Controller optimized for portable applications.

The SMSC USB2660/USB2660i is a USB 2.0 compliant, Hi-Speed hub, card reader, and protocol converter combo solution.

EVB-USB2642 Evaluation Board for USB2642 USB 2.0 hub and flash media card controller combo

The SMSC USB2640/USB2641 is a USB 2.0 compliant, Hi-Speed hub for USB port expansion with an attached mass storage class peripheral controller.

The 7-Port Hub is a low power, OEM configurable, MTT (multi transaction translator) hub controller IC with 7 downstream ports for embedded USB solutions. It is fully compliant with the USB 2.0 Specification and will attach to an upstream port as a Full-Speed Hub or as a Full-/Hi-Speed Hub.

The SMSC USB2514 MultiTRAK™ is a Low-Power Full-Featured High-Speed USB2.0 compliant hub with four down-stream ports.

The SMSC EVB-USB2240-IND is an Ultra Fast USB 2.0 Multi-Slot Flash Media Controller with SD, MS, and xD connectors.

The UFX7000 is a high performance USB 3.0 graphics adapter with multiple graphics interfaces. The UFX7000 is an ideal solution for extending a PC workspace to an additional monitor without the need for an additional internal graphics card.

Evaluation boards for SEC1110, SEC1210, and SEC1212-DEV smartcard and USB interface chips.