Инструменты и материалы

The LProg Programmer by Embed is a low cost, light weight programmer for 3.3V PIC MCUs only.

chipKIT? Series Трансивер; 802.11 b/g (Wi-Fi, WiFi, WLAN) Плата(ы) 2.4GHz 3.3V USB

Трансивер Плата, Кабель 2.4GHz~2.484GHz 3.7V Модуль UART

Microchip Technology Inc. manufactures world-class components for every application in the radio frequency identification (RFID) system. The microID family of RFID tags provides drop-in compatible solutions to the most commonly used 125 kHz tags and an upgrade path for virtually any 125 kHz or 13.56 MHz application with higher performance and new features.

The PD70101 and PD70201 are integrated Powered Device (PD) interface and PWM controllers for DC-DC converters in IEEE802.3af/at applications.

Power over Ethernet 802.3af/at PD Controller

The PD70101 and PD70201 devices are integrated Powered Device (PD) interface and PWM controllers for a DC-DC converter used in IEEE802.3af and IEEE802.3at applications.

The PD70101 and PD70201 devices are integrated Powered Device (PD) interface and PWM controllers for a DC-DC converter used in IEEE802.3af and IEEE802.3at applications.

Приёмник Плата(ы) 433.92MHz

The Micrel MIC28304 is synchronous step-down regulator module, featuring a unique adaptive ON-time control architecture. The module incorporates a DC-to-DC controller, power MOSFETs, bootstrap diode, bootstrap capacitor, and an inductor in a single package.

The MIC23158/9 is a high efficiency, 3MHz, dual, 2A synchronous buck regulator with HyperLight Load® mode, power good output indicator, and programmable soft start.

The Micrel MIC2245 is a high efficiency 4MHz pulse width modulated (PWM) synchronous buck (step-down) regulator that features a LOWQ™ LDO standby mode that draws only 18µA of quiescent current.

The Micrel MIC2208 is a high efficiency PWM buck regulator that provides up to 3A of output current. It operates at 1MHz and has external voltage mode compensation allowing a closed loop bandwidth of over 100 KHz.

The Micrel MIC2103/04 are constant-frequency, synchronous buck controllers featuring a unique adaptive on-time control architecture.

The MCP1630 Automotive Input Boost Converter Demo Board is a development board for the MCP1630 high-speed, microcontroller-adaptable pulse width modulator.

Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS Mode

Digital Power Plug-In Module (PIM) for emulating and debugging firmware on dsPIC33CK256MP506-based target boards.

The LX3301A is a member of Microsemi’s new family of smart sensor interface products, designed to process inductive sensors based on LVDT principles, integrating two analog channels, oscillator/exciter, 32-bit RISC processor, non-volatile memory, and analog or PWM outputs.

Quad high voltage amplifier array device in 24-pin TSSOP package, with demo board for evaluation.

Трансивер; Bluetooth® Smart Ready 4.x Dual Mode Плата(ы), Кабель(и) 2.4 ГГц 32 пинов Модуль

Трансиверная плата(ы)

M2M (Машинное взаимодействие) платы 2.4GHz 12V Ethernet, RS-232

KeeLoq® Плата 433.92 МГц

KEELOQ® Серия KeeLoq® Плата(ы), Аксессуары 6V