Встроенные решения

Programmable Relay ZEN V2 Units with increased functionality and higher precision in a compact body (70 mm wide × 90 mm high).

Increased functionality in a compact body (70 mm wide × 90 mm high). Easy programming is available using the LCD and operation buttons.

Programmable Relay ZEN V2 Units with increased functionality and higher precision in a compact body (70 mm wide × 90 mm high).

Connector-Terminal Block Conversion Units for General-purpose Devices, XW2R series. Available with various connection methods including Phillips screw, slotted screw, push-in, and e-CON.

Connector-Terminal Block Conversion Unit with three-tiered terminal block for easier wiring, designed for 16 inputs.

The W4S1 Switching Hub from OMRON is a low-cost, unmanaged switch that maintains superior reliability and consistent control data performance on an Ethernet/IP network.

Low-cost unmanaged Industrial Ethernet (EtherNet/IP) switching hub with high reliability and no software settings required.

Fixed type 2-dimensional code reader that handles dot peen markings and reads codes at any angle (360°).

A fixed type 2-dimensional code reader that handles dot peen markings.

This document provides the hardware specifications of Hybrid Manual Insertion Card Reader of V4KU-*** Series with USB interface. This equipment can read the data of Magnetic Card, and read/write the data of IC card.

Hybrid Manual Insertion Card Reader of V4KU-*** Series with USB interface for reading magnetic cards and reading/writing IC cards.

Hybrid Manual Insertion Card Reader of V4KF-*** Series with RS232 interface for reading magnetic cards and reading/writing IC cards.

Hybrid Manual Insertion Card Reader of V4KF-*** Series with RS232 interface for reading magnetic cards and reading/writing IC cards.

Hybrid Manual Insertion Card Reader of V4KF-*** Series with RS232 interface for magnetic card and IC card read/write.

Low cost, compact manual swipe magnetic card reader with TTL interface.

Low cost, ultra-compact manual swipe magnetic card reader with low power C-MOS technology and multiple configurations.

Low Cost, Ultra-Compact, Manual Swipe Magnetic Card Reader with TTL-compatible interface and multiple track configurations.

Low Cost, Ultra-Compact, Manual Swipe Magnetic Card Reader

Low cost, ultra-compact manual swipe magnetic card reader with TTL interface.

Low Cost, Ultra-Compact, Manual Swipe Magnetic Card Reader with TTL-compatible interface and multiple configurations.

Low Cost, Ultra-Compact, Manual Swipe Magnetic Card Reader with low power C-MOS technology and TTL-compatible interface.

Low cost, ultra-compact manual swipe magnetic card reader with TTL interface.

Trajexia is Omron's new motion platform that offers freedom to communicate, with built-in Ethernet and field bus interfaces, providing the performance of a dedicated motion system.

CompoBus/S is an industrial communication network for connecting slaves such as sensors and actuators to a master, supporting high-speed and long-distance modes.

CompoBus/S is a high-speed communication system that allows exchanging up to 256 I/O points with a maximum of 32 slaves at a cycle time of 1 ms. It supports both high-speed and long-distance communication modes.

CompoBus/S is a field network system that enables high-speed and long-distance communication for industrial automation, connecting up to 32 slaves with 256 I/O points in 1 ms.

CompoBus/S is a communication network for remote I/O systems that allows high-speed and long-distance communications with reduced wiring effort using dedicated cables.

CompoBus/S is a field network system for connecting sensors and actuators to controllers, featuring high-speed and long-distance communication modes.

CompoBus/S is a field network system that combines devices such as sensors and actuators into one functional unit treated as a DeviceNet slave.

CompoBus/S is a high-speed communication system that exchanges 256 I/O points with up to 32 slaves in 1 ms using a single dedicated cable, significantly reducing wiring effort.

CompoBus/S is a field network system for high-speed communication between PLCs and remote I/O devices, supporting both high-speed and long-distance communication modes.

CompoBus/S is a high-speed field network system for remote I/O and device control, supporting both high-speed and long-distance communication modes.

CompoBus/S exchanges 256 I/O points of data with a maximum of 32 Slaves at a maximum communications cycle time of only 1 ms per point. It connects through a single dedicated cable, greatly saving wiring effort.

CompoBus/S is a high-speed industrial communication network for remote I/O systems, supporting up to 32 slaves and 256 I/O points with dedicated cabling to reduce wiring complexity.

CompoBus/S is a field network for industrial automation that connects sensors and actuators to controllers, offering high-speed and long-distance communication modes with dedicated cables to simplify wiring.

CompoBus/S is a field network system that provides high-speed communication for remote I/O systems, featuring programmable slaves, master functions, and various terminal types.

CompoBus/S is a high-speed field network system for remote I/O and sensor connections, enabling communication between master units and slave devices such as sensors and actuators.

Programmable Slaves combine devices, such as sensors and actuators, into one functional unit that is treated as a DeviceNet slave. OMRON Programmable Slaves function as DeviceNet slaves, yet they greatly facilitate device distribution and provide PLC functionality to enable easy system expansion and create new potential.

CompoBus/S is a field network system for industrial automation that provides high-speed and long-distance communication for connecting sensors, actuators, and I/O modules.

CompoBus/S is a field network for industrial automation that enables high-speed and long-distance communications between controllers and slave devices. It reduces wiring complexity through dedicated cables and supports both high-speed (750 kbps) and long-distance (93.75 kbps) communication modes.

CompoBus/S is a high-speed bus system for remote I/O and sensor networks, featuring both high-speed and long-distance communication modes with dedicated cabling to reduce wiring effort.

CompoBus/S is a field network system that enables high-speed communication between sensors, actuators, and controllers using a dedicated cable. It supports both high-speed (750 kbps) and long-distance (93.75 kbps) communication modes with up to 32 slaves and 256 I/O points.

CompoBus/S is a field network system for industrial automation, providing high-speed communication and easy wiring for sensors and actuators.

CompoBus/S is a field network system that connects programmable slaves, master units, and various I/O devices using a dedicated cable to save wiring effort and enable high-speed and long-distance communications.

CompoBus/S is a field network for industrial automation that connects sensors, actuators, and other devices to a master controller using a single dedicated cable, supporting both high-speed and long-distance communication modes.

Selection guide for motion and motor control solutions including servo drives, motors, inverters, encoders, and controllers.

The G Series AC Servomotors and Servo Drives provide a wide variation of models with functions and performance demanded in servo systems, featuring easy adjustment, quick vibration suppression, and built-in MECHATROLINK communications interface.

A super-compact, high-performance servo system that's easy to use. Advanced functionality in an ultra compact design.

The NX Series I/O System enhances application quality and range through standardized control systems, synchronized data collection, and flexible configuration for industrial automation.