Интегральные схемы интерфейса

The XTR117 is a precision current output converter designed to transmit analog 4-20mA signals over an industry-standard current loop.

The XTR115 and XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop.

Monolithic 4-20mA two-wire current transmitters with sensor excitation and linearization.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters. They provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifier, and current output circuitry on a single integrated circuit.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters with sensor excitation and linearization.

Monolithic 4-20mA two-wire current transmitters with sensor excitation and linearization for RTD temperature sensors and bridges.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters. They provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifier, and current output circuitry on a single integrated circuit.

The XTR110 is a precision voltage-to-current converter designed for analog signal transmission.

The XTR108 is a "smart," programmable, 4-20mA, two-wire transmitter designed for temperature and bridge sensors.

The XTR106 is a low cost, monolithic 4-20mA, two-wire current transmitter designed for bridge sensors. It provides complete bridge excitation, instrumentation amplifier, sensor linearization, and current output circuitry.

The XTR106 is a low cost, monolithic 4-20mA, two-wire current transmitter designed for bridge sensors.

The XTR105 is a monolithic 4-20mA, 2-wire current transmitter with two precision current sources for platinum RTD temperature sensors and bridges.

The XTR104 is a monolithic 4-20mA, two-wire current transmitter integrated circuit designed for bridge input signals.

The RM42L432 device is a high-performance microcontroller for safety systems with dual CPUs in lockstep, ECC on flash and RAM, and parity protection.

The RM41L232 is a 16- and 32-Bit RISC Flash Microcontroller for safety-critical applications with dual CPUs in lockstep, ECC on flash and RAM, and integrated safety features.

OMAP-L137 is a C6000 DSP+ARM Processor device with known exceptions to functional specifications for various silicon revisions.

OMAP3515 and OMAP3503 high-performance, applications processors are based on the enhanced OMAP™3 architecture.

The XIO2000A Evaluation Board (EVM) implements a Peripheral Component Interconnect (PCI) Express to a PCI bridge circuit using the Texas Instruments XIO2000A PCI Express to PCI Bus Translation Bridge.

PCI Express to PCI Bus Translation Bridge.

The XIO2200A is a PCI Express to PCI Bus Translation Bridge with 1394a OHCI and Two-Port PHY.

The XIO2001 is a single-function PCI Express to PCI translation bridge that is fully compliant to the PCI Express to PCI/PCI-X Bridge Specification, Revision 1.0.

XIO2000A/XIO2000AI PCI Express to PCI Bus Translation Bridge

AM571x Sitara™ Processors are ARM-based applications processors built to meet the intense processing needs of modern embedded products.

The 66AK2Hxx platform combines the quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs using the KeyStone II architecture.

66AK2Hxx Multicore DSP+ARM KeyStone™ II System-on-Chip (SoC) combining quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs.

The 66AK2Hxx platform combines the quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs using the KeyStone II architecture.

66AK2G0x is a family of heterogeneous multicore System-on-Chip (SoC) devices based on TI’s field-proven Keystone II (KS2) architecture.

66AK2E0x Multicore DSP+ARM KeyStone II System-on-Chip (SoC) with up to four ARM Cortex-A15 processor cores and one C66x DSP core, running at up to 1.4 GHz.

14-Bit, 10MHz CCD/CIS SIGNAL PROCESSOR

12-BIT, 21-MSPS, ULTRALOW-POWER CCD SIGNAL PROCESSOR

The VSP1021 device is a highly-integrated monolithic analog-signal processor/digitizer designed to interface the area charge-coupled-device (CCD) sensors in digital-camera and camcorder applications.

VFC32 voltage-to-frequency converter provides an output frequency accurately proportional to its input voltage.

Dual, Variable-Gain Amplifier with Low-Noise Preamp

Dual, Variable-Gain Amplifier with Low-Noise Preamp

Dual, Variable-Gain Amplifier with Low-Noise Preamp

TMS320VC5501 Fixed-Point Digital Signal Processor

The ISOS141-SEP radiation-tolerant device is a high-performance, quad-channel digital isolator in a small form factor 16-pin QSOP package.

USBN9603/USBN9604 are integrated USB Node controllers compatible with USB specification versions 1.0 and 1.1, and are advanced versions of the USBN9602.

USBN9603/USBN9604 are integrated USB Node controllers compatible with USB specification versions 1.0 and 1.1, and are advanced versions of the USBN9602.

USBN9603/USBN9604 are integrated USB Node controllers compatible with USB specification versions 1.0 and 1.1, and are advanced versions of the USBN9602.

The USBN9603/4 are integrated USB Node controllers with enhanced DMA support, compatible with USB specification versions 1.0 and 1.1, and an advanced version of the USBN9602.

The USBN9603/4 are integrated USB Node controllers with enhanced DMA support, compatible with USB specification versions 1.0 and 1.1, and an advanced version of the USBN9602.

The USBN9603/4 are integrated USB Node controllers with enhanced DMA support, compatible with USB 1.0 and 1.1.

The USBN9603/4 are integrated USB Node controllers with enhanced DMA support, compatible with USB specification versions 1.0 and 1.1, and an advanced version of the USBN9602.

The USBN9602 is an integrated USB Node controller compatible with USB Specification Versions 1.0 and 1.1, featuring an integrated USB transceiver, 3.3V regulator, and support for seven FIFO endpoints.

The ULN2803A device is a high-voltage, high-current Darlington transistor array. The device consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.

The ULN2803A device is a high-voltage, high-current Darlington transistor array. The device consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.

The ULN2803A device is a high-voltage, high-current Darlington transistor array. The device consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.

The ULN2803A device is a high-voltage, high-current Darlington transistor array.

The ULN2803A device is a high-voltage, high-current Darlington transistor array consisting of eight NPN Darlington pairs with common-cathode clamp diodes for switching inductive loads.