Мощность

Single-Channel Linear Regulator Power Management Solution Providing I up to 1.4 A from V = 3.3 V and 800 mA from V = 5.0 V

Dual Linear Regulator Power Management Solution for Xilinx Spartan-3 FPGAs, providing up to 850 mA at 3.3V.

The UCD9112 is a synchronous buck digital PWM controller designed for point of load power applications. This device integrates dedicated circuitry for dc/dc loop management with a microcontroller core, flash memory and a PMBus™ interface.

BiCMOS Cold Cathode Fluorescent Lamp Driver Controller

The UCC3956 family of switch-mode lithium-ion battery-charger controllers accurately control lithium-ion battery charging with a highly-efficient average-current-control loop.

Protects Sensitive Lithium-Ion Cells From Overcharging and Over-Discharging, Dedicated for One-Cell Applications

The UCC39421 family of synchronous PWM controllers is optimized to operate from dual alkaline/NiCd cells or a single Lithium-Ion (Li-Ion) cell, and convert to adjustable output voltages from 2.5 V to 8 V.

The UCC39421 family of synchronous PWM controllers is optimized to operate from dual alkaline/NiCd cells or a single Lithium-Ion (Li-Ion) cell, and convert to adjustable output voltages from 2.5 V to 8 V.

Low-input voltage, single-inductor-boost converters optimized for single or dual alkaline cells, stepping up to 3.3V, 5V, or adjustable output at 200mW.

The UCCx9411 family of low-input voltage, single-inductor-boost converters is optimized to operate from a single or dual alkaline cell, and steps up to a 3.3 V, 5 V, or adjustable output at 200 mW.

The UCC3918 low on-resistance hot swap power manager provides complete power management, hot swap capability, and circuit breaker functions.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch to protect cells from overcharging and overdischarging.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch to protect cells from overcharging and overdischarging.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch.

UCC38C4x family is a high-performance current-mode PWM controller with pin-to-pin compatibility to the UC384xA family.

BiCMOS LOW-POWER CURRENT-MODE PWM CONTROLLER with enhanced performance and pin-to-pin compatibility to the UC384x family.

UCC38C4x family is a high-performance current-mode PWM controller.

UCC38C4x family is a high-performance current-mode PWM controller. It is an enhanced BiCMOS version with pin-for-pin compatibility to the industry standard UC384xA family and UC384x family of PWM controllers.

UCC38C4x family is a high-performance current-mode PWM controller. It is an enhanced BiCMOS version with pin-for-pin compatibility to the industry standard UC384xA family and UC384x family of PWM controllers.

The UCC1889 controller is optimized for use as an off-line, low power, low voltage, regulated bias supply. The unique circuit topology utilized in this device can be visualized as two cascaded flyback converters, each operating in the discontinuous mode, and both driven from a single external power switch.

Frequency Foldback Current Mode PWM Controller. The UCC3884 is a high performance current mode PWM controller intended for single ended switch mode power supplies.

The UCC2850x family provides all of the control functions necessary for an active power-factor-corrected preregulator and a second-stage dc-to-dc converter.

The UCC2850x family provides all of the control functions necessary for an active power-factor-corrected preregulator and a second-stage dc-to-dc converter.

The UCC2819/UCC3819 provides all the functions necessary for active power factor corrected preregulators.

The UCC2819A/UCC3819A provides all the functions necessary for active power factor corrected preregulators.

The UCC2819A/UCC3819A provides all the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the ac-input line current waveform to correspond to that of the ac-input line voltage.

The UCC2819A/UCC3819A provides all the functions necessary for active power factor corrected preregulators.

The UCC2819A/UCC3819A provides all functions necessary for active power factor corrected preregulators, achieving near-unity power factor by shaping the AC input line current waveform to match the AC input line voltage using average current mode control.

The UCCx817/18 family provides all the functions necessary for active power factor corrected preregulators.

The UCC3817A and the UCC3818A family provides all the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the ac input line current waveform to correspond to that of the ac input line voltage.

The UCC3817A and UCC3818A family provides all the functions necessary for active power factor corrected preregulators.

The UCC3817A and the UCC3818A family provides all the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the ac input line current waveform to correspond to that of the ac input line voltage.

The UCC3817A and the UCC3818A family provides all the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the ac input line current waveform to correspond to that of the ac input line voltage.

8 Terminals 8-Pin DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 1MHz

The UCC3813-0/-1/-2/-3/-4/-5 family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching power supplies with minimal parts count.

The UCC3813-0/-1/-2/-3/-4/-5 family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching power supplies with minimal partscount.

The UCC3808 is a family of BiCMOS push-pull, high-speed, low-power, pulse-width modulators.

The UCC3808 is a family of BiCMOS push-pull, high-speed, low-power, pulse-width modulators.

The UCC3808A is a family of BiCMOS push-pull, high-speed, low-power, pulse-width modulators.

The UCC3808A is a family of BiCMOS push-pull, high-speed, low-power, pulse-width modulators.

8-PIN CURRENT MODE PUSH-PULL PWM CONTROLLERS WITH PROGRAMMABLE SLOPE COMPENSATION. The UCC38083/4/5/6 is a family of BiCMOS pulse width modulation (PWM) controllers for dc-to-dc or off-line fixed-frequency current-mode switching power supplies.

8-pin current mode push-pull PWM controllers with programmable slope compensation.

8-PIN CURRENT MODE PUSH-PULL PWM CONTROLLERS WITH PROGRAMMABLE SLOPE COMPENSATION. The UCC38083/4/5/6 is a family of BiCMOS pulse width modulation (PWM) controllers for dc-to-dc or off-line switching power supplies.

8-Pin Current Mode Push-Pull PWM Controllers with Programmable Slope Compensation.

8-pin current mode push-pull PWM controllers with programmable slope compensation. The UCC38083/4/5/6 family is BiCMOS PWM controllers for dc-to-dc or off-line switching power supplies.

The UCC38083/4/5/6 is a family of BiCMOS pulse width modulation (PWM) controllers for dc-to-dc or off-line current-mode switching power supplies.

8-pin current-mode push-pull PWM controllers with programmable slope compensation for dc-to-dc or off-line switching power supplies.